TISCO top quality 347/347H stainless steel hot rolled plate, 347/347H cold rolled stainless steel sheet
347 is frequently used for the fabrication of equipment, which must be placed in service under severe corrosive conditions, and is also common to the petroleum refining industries. that consistently used 347 include:
▪ High temperature chemical processes
▪ Heat exchanger tubes
▪ High temperature steam service
▪ High pressure steam pipes
▪ Radiant superheaters
▪ Boiler tubes
▪ Heavy duty exhaust systems
▪ General refinery piping
▪ ASTM/ASME: UNS S34700 / S34709
▪ EURONORM: FeMi35Cr20Cu4Mo2
▪ DIN: 2.4660
Weight % (all values are maximum unless a range is otherwise indicated)
Element | 347 | 347H |
Cr | 17.0-24.0 | 17.0-24.0 |
Ni | 9.0-13.0 | 9.0-13.0 |
C | 0.08 max | 0.04-0.1 |
Mn | 2.0 max | 2.0 max |
P | 0.045 max | 0.045 max |
S | 0.03 max | 0.03 max |
Si | 0.75 max | 0.75 max |
Co+Ta | 10 * (C + N) -1.00 | 8* (C + N) -1.00 |
Values at 68°F (20°C) (minimum values, unless specified)
0.2% Offset Yield Strength | Ultimate Tensile Strength | Elongationin 2” | Hardness | ||
Psi(min) | Mpa | Psi(min) | Mpa | % | Brinell (max) |
30,000 | 205 | 75,000 | 515 | 40 | 201 |
Alloy 347 stainless steel plate can be easily welded and processed by standard shop fabrication practices.
The alloy is quite ductile and forms easily.
The high sulfur content of Alloy 303 also has a detrimental impact on hot workability. If hot forming is required, once again, 304 should be considered as an alternate selection.
The cold work hardening rate of 347 stainless steel plate makes it less machinable than 410 stainless steel, but similar to 304.
347/347H stainless steel strip sizes and specifications | |
Grade | 347/347H |
Cold rolled stainless steel strip | Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
Hot rolled stainless steel strip | Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling |
Stainless steel foil | Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B |
Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
347/347H stainless steel coil sizes and specifications | |
Grade | 347/347H |
Cold rolled stainless steel coil | Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
Hot rolled stainless steel coil | Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling |
Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
347/347H stainless steel pipe sizes and specifications | |
Grade | 347/347H |
Stainless steel seamless pipe | Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm |
Stainless steel welded pipe | Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm |
Stainless steel capillary pipe | Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm |
Stainless steel welded sanitary pipe | Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm |
Stainless steel seamless sanitary pipe | Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm |
Stainless steel square pipe | Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
Stainless steel rectangular pipe | Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
Stainless steel coil pipe | Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm |
Standard | American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81 |
347/347H stainless steel profile sizes and specifications | |
Grade | 347/347H |
Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO |
Standard | ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 . |
Stainless steel round Bar | Diameter: 2mm - 600mm |
Stainless steel bright Bar | Diameter: 2mm - 600mm |
Stainless steel hex Bar | Dimension: 6mm - 80mm |
Stainless steel square bar | Dimension: 3.0 - 180mm |
Stainless steel flat bar | Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm |
Stainless steel angle bar | as requirements |
Length | Normally 6m, or produce as requirements |
Surface | Black, Bright. Peeled and Polished, Solution annealed. |
Delivery condition | cold drawn, hot rolled, forged, grinding, centerless grinding |
Tolerance | H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements |
347/347H stainless steel plate sizes and specifications | |
Grade | 347/347H |
Cold rolled stainless steel plate | Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc |
Hot rolled stainless steel sheet | Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |
Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4305 |
Stainless steel plate | Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |